Mibec DHP

DHP Easy Packs

Complete Pre-insulated Pipe Kits

Mibec can supply from stock pre-insulated pipe kits, that give flexibility when needed for use on a single small scale insulated pipe project. Mibec DHP is a Pre-insulated, flexible, energy-saving piping system that is perfectly suited for transporting hot water between the remote heat source and the building applications.

If you need a simple insulated pipe kit for your domestic RHI project (such as a wood pellet boiler, log boiler or air source heat pump project), the new Mibec DHP Easy Pack kits are ideal.

Each kit comes in 10m, 15m, 20m and 25m lengths, and comes complete with everything you need to connect to your system at each end. Full installation instructions are provided, and no special assembly tools are needed! The flexibility of pipe means that no special bends are required to enter each building or property.

Mibec DHP comprises a carrier pipes surrounded by a thick insulation layer, all contained in a twin-wall outer casing for maximum protection. The outer diameter of the main pipe is 125mm with the two pipes housed within the insulation, with a choice of either 25mm (DN20) or 32mm (DN25) carrier pipes, which are ideal for all domestic applications up-to approx 40kW (dependant upon supply temperatures).

Mibec DHP pipe kit internal carrier pipes are can carry temperatures of up to 95oC. The carrier pipes are made from PE-Xa, a high density, cross-linked polyethylene inherently resistant to chemical corrosion, able to withstand high temperatures and with a non-permeable membrane to stop oxygen ingress.

Mibec DHP pipes are used throughout the UK and are available direct from our offices in Shropshire and Cirencester.

  • Unequalled flexibility for easy installation. Can provide a bend radius of as little as 0.6m
  • Perfect for renewable energy applications
  • Supplied in 10m, 15m, 20m and 25m packs
  • A solution for every application

Mibec DHP Easy-Pack comprises of the following items:

  • Pipe coil – 10m, 15m, 20m and 25m lengths
  • 4 Pipe Couplings
  • 2 Dust Caps
  • Installation Instructions

pack-information

Please feel free to email or call our support department on 0330 053 8880 where one of our trained advisers will be happy to help.

Easy installation

  • No special assembly tools required
  • No couplings or accessories necessary to overcome obstacles*
  • Faster assembly times
  • No skilled welders required to make the connections
  • No expensive pre-insulated bends required
  • Limited weight facilitates easy installation
  • Simple and safe modular system of connections, including insulation and finishing kits

Put simply, the Mibec DHP insulated pipe kit, is the ideal solution for simple A to B heating water projects!

*Under normal installation circumstances.

Saving energy and preserving the environment

Mibec DHP pipes are durable, contain no pollutants and are non-toxic. All materials used are produced without CFCs (Chlorofluorocarbons) that can deplete the ozone layer. During the production process we are highly conscious of energy consumption and there is no pollution of air, water or soil.

Mibec DHP is very well insulated so heat losses are kept to a minimum. Typical heat losses would be a follows (using a 10m 125/32m Kit):

Assuming a flow/return temp of 80/60 oC, and a soil temperature of 10oC

Heat Loss (per metre) – 20.6 Watts or 210 Watts per Hour Total. This equates to less than 0.05 oC over the 10m length.

PDF Downloads

Mibec DHP Packs